It will save you lots of money if you tackle this yourself. It is shown in the video that to change the suspension you will require a several sockets, along with an torque wrench. And that is basically it! Although shock replacement can seem intimidating if you’re not up-to-date, it’s possible to complete the task quickly and efficiently using the correct equipment. Apply the emergency brake and park the vehicle in an open area. Lift the car off the ground with the help of a jack. Then, support it with jack stands. The wheel can be removed from the place of the shock absorber to be replaced. Find the bolt that is holding the shock absorber in place and pull it off. The old shock absorber is to be removed after removing the bolt that holds it to the top of the shock absorber. Then reverse the process to put in your new shock. To install the shock on the other side of the car, repeat the steps. To make sure the new shock assembly is operating well, lower the car to the ground and take a test drive. Always refer to your car’s instruction manual prior to completing the work of maintenance. put on the proper protective tools, which include gloves as well as eyes. na6cue2s1i.